Back to top

2014 Custom Kernan ES 44

Ohio

$299,000

Designed to be exciting to race around the buoys while offering a comfortably fast and stable platform for offshore races, the ES44 is proven winner on the racecourse.

This is hull #2 of the ES-44 series, hull #1 Swish has had a string of successes with their most notable a win at Hamilton Island Race Week last year.

Hull #2 was built, sea trialed, did one fresh water series and then put in storage just waiting for the right owner to come along.

She is essentially new and turn key.

he ES 44 offers performance typically found in high end custom builds through strict attention to build weight, a modern design T bulb keel, double spreader carbon mast and boom and an ergonomically efficient deck layout. She has an extensive, new inventory of carbon membrane sails from Chesapeake Sails, B&G instruments, and Aspire Spars carbon fiber mast, boom, and prod.

Basic Boat Info

Price: $299,000
Make: Custom
Model: Kernan ES 44
Year: 2014
Condition: New
Category: Sail
Designer: Kernan Yacht Design
Construction: Composite
Keel Type: Bulb Keel

Dimensions

Length: 44 ft
Length Overall: 44 ft
Waterline Length: 42'7 ft
Beam: 12 ft
Max Draft: 9 ft
Min Draft: 9 ft
Displacement: 12,750 lb
Bridge Clearance: 71 ft
Cabin Headroom: 6'2 ft
Ballast: 6,700 lb
Single Berths: 4
Double Berths: 1

Engines / Speed

Engines: 1
  • Make: Volvo
  • Model: D-130
  • Drive Type: SailDrive
  • Fuel: Diesel
  • Engine Power: 30hp
  • Propeller Type: 2 Blade, Folding
  • Year: 2014

Tanks

Fuel Tanks: 1
Fuel Tank Capacity: 20 gal
Water Tanks: 1
Water Tank Capacity: 40 gal
Holding Tank Count: 1
Holding Tank Capacity: 9 gal

Other

Heads Count: 1
Drive Type: Sail
Boat Class: Racers

Contact

Norman Davant
cell 510-685-7453
Sail California

Office

San Francisco
1070 Marina Village Parkway Suite 108
Alameda, California, US, 94501
Tel:510-523-8500


Specifications

Rig:

            I:                      57.42 ft.         -           17.50 m.

           J:                     16.14 ft.          -           4.92 m.

            P:                    59.83 ft.         -           8.24 m.

            E:                    21.08 ft.         -           6.42 m.

           ISP:                  66.20 ft.         -           20.18 m.

           STL:                 22.96 ft.          -           7.00 m.

Hull/Deck Construction Details

  • The Kernan 44 is built to the highest marine manufacturing standards, utilizing the latest hi-tech materials and building techniques for racing yachts.  The Kernan 44 is designed to compete in a wide range of racing venues and conditions with the most efficient crew composition.
  • All composite structures are designed to be strong, stiff and light-weight to produce optimal performance on the race course.
  • Hull and deck construction consists of vacuum-consolidated, carbon reinforced e-glass materials with industry-leading synthetic coring producing maximum flexural and impact strength.
  • Additional reinforcement for all highly loaded deck fittings and hardware.
  • Scantlings meet or exceed ABS standards for offshore racing yachts.

Finishes

  • Awlgrip paint finish to hull and deck
  • Non-skid deck areas with painted finish
  • Primer applied below waterline
  • SeaDek EVA material in cockpit for durable, shock absorbent surface to reduce crew fatigue and improve traction and safety
  • Interior finished with lightweight, satin white paint
  • Black powder coated stainless steel stanchions and pushpit

Deck

  • Deck designed for function and aesthetics
  • Generous oversized cockpit 
  • Proven winch spacing and general layout based efficient crew dynamics
  • Pedestal driven primary winches allows for:

               -Superior winch speed on asymmetric spinnaker gybes

               -Winch driven spinnaker hoists

  • Cockpit operated bilge pump

Steering and Rudder

  • Double carbon fiber wheels
  • Female molded and infused blade  
  • Jefa self-aligning top and bottom bearings

T-bulb Keel

  • Cast ductile Iron keel fin faired to 0-2mm to templates, Keel ballast antimonial lead bulb faired to +/-1mm to templates, epoxy clear coated and finished with 2 additional coats of epoxy primer.
  • Keel set up with Keel flange for easy alignment and removal for trucking.

Interior Layout

  • Low weight saloon benches / berths
  • racing galley, with sink and two burner stove, pressure water tap in galley and cockpit shower
  • semi enclosed head with holding tank with electronic macerator pump and Y valve with deck pump out access
  • v-berth and 4 settee berths
  • carbon fiber floor boards
  • removable Yeddi cooler
  • red and white interior lighting
  • Nav Station with full leg room, instrument panel and laptop station

Electrical System

  • 12 volt batteries: 2 house, 1 starter
  •  Blue Seas custom electrical panel
  •  Shore power 
  •   Automatic Bilge Pumps
  •   ISAF approved led running lights

Deck Hardware

  • Complete Harken gear package
  • Harken MX pedestal System
  • 2 x Harken B530 TCR 3-speed winches with below deck pedestal shafts
  • 2 x Harken B50.2 STP winches
  • 4 x Harken B46.2 STP winches
  • Harken mainsheet system & traveler car
  • Harken adjustable jib tracks
  • Spinlock XCS clutches
  • Challenger premium black powder-coated stanchions, pulpit & pushpit
  • Stainless steel wire lifelines
  • Custom composite toe rails

Sail Inventory

  • Carbon membrane square top main, 6 battens, 1 reef, draft stripes, numbers, Cunningham, floating tack, Carbon battens.
  • Code 1 carbon membrane jib 106% LP, 4 battens, draft stripes
  • Code 2 carbon membrane jib 106% LP, 4 battens, draft stripes
  • Code 3 carbon membrane jib 103% LP, 4 battens, draft stripes
  • A1  asymmetrical spinnaker - .6oz nylon, numbers
  • A2 running Asymmetrical spinnaker - .6oz nylon, numbers
  • Spinnaker staysail - .9oz nylon
  • Dacron storm jib
  • Jockey Red Horse blanket mainsail cover.
  • Jockey Red life line covers (4)
  • Jockey Red sheet bags (2)

Spars and Standing Rigging

  • Keel-stepped carbon mast and boom
  • Two sets of swept back airfoil spreaders
  • Fixed carbon bowsprit
  • Twin topmast backstays allow for control of mast and forestay tension in a           broad range of sailing conditions
  • Optional jib halyard lock
  • (1 x ferrule for fractional spinnaker halyard to be offset can be used as       secondary jib halyard.
  • Optional inner forestay – genoa staysail with 2 delrin sheaves
  • Hydraulic forstay
  • Mast jack
  • Adjustable mast step
  • Windex light on rig
  • Boom has 16:1 outhaul and sheaves for 2 reefs
  • Rod rigging

Running Rigging

  • 2:1 Main halyard
  • 1 x Masthead spinnaker halyards in over/under arrangement
  • 1 x Fractional spinnaker halyard above headstay
  • 1 x Continuous mainsheet system
  • 1 x Spinnaker tack line
  • 1 x 16:1 Outhaul purchase
  • 2 x Reefing lines
  • 1 x Cunningham purchase
  • 2 x Traveler control lines

 

Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Additional Contact Information

Norman Davant

510-685-7453

norman@sailcal.com

 


$
%
$
Disclaimer This calculator is intended solely for general informational purposes, and to provide a rough estimate based on the information you provide. You should not base your decision on this estimate alone.